zip packages to your device using any method you are familiar with. Using adb: adb push filename.zip /sdcard/.Optional: Download 3rd party applications packages, like Google Apps which are necessary to download apps from Google Play. Download the CyanogenMod build package for your device that you’d like to install to your computer.Make sure your computer has working adb.(No need to do step #4 below in the installation process) If all has gone well, then your device should now be in recovery. (if using a fastboot USB cable swap to a normal USB cable before entering the next command).fastboot -i 0x1949 flash boot kfhd7-freedom-boot-7.4.6.img.fastboot -i 0x1949 flash recovery kfhd7-twrp-2.8.7.0-recovery.img.fastboot -i 0x1949 flash bootloader kfhd7-u-boot-prod-7.2.3.bin.(if you don’t need a fastboot cable then power on the device after entering the 1st command below) Issue the following commands into your command/terminal window on your PC 1 at a time. With the device powered off: connect your FASTBOOT USB cable(if needed) to the Kindle which should cause it to power on and enter “FASTBOOT” mode. Step 3: Use fastboot to apply exploit files and reboot into recovery IF ITS CORRUPTED AND YOU APPLY WITH FASTBOOT, YOUR DEVICE IS A BRICK. VERY IMPORTANT THAT YOU DOUBLE CHECK THE MD5SUM ON THIS FILE. An older bootloader with an unlock exploit (this is specific to your device):.Step 2: Download the files you will need to install 2nd-bootloader & TWRP recovery: If you have any problems with these initial steps try downloading Amazon’s USB drivers for the Kindles and then repeat the above till you see the desired response. It *SHOULD* show a Fastboot screen and your terminal window should show something like:.If you need to, connect your fastboot cable to the Kindle at this time.Type the following command into a cmd/terminal window on your PC:.For the Kindle Fire HD 8.9″ it is not required.) This cable is a special USB cable with a powered pin that normal USB cables do not have. and Kindle Fire HD 7″ (2012) a fastboot cable is needed for this procedure. Step 1: Test your fastboot driver installation by doing the following: These instructions are for the Kindle Fire 2nd Ed.(otter2) / Kindle Fire HD 7″ (2012)(tate) and Kindle Fire HD 8.9″ (jem) devices only! THIS IS A ONE TIME INSTALLATION TO ENABLE CUSTOM RECOVERY / ROMS One-Time Install of Amazon 2nd-Bootloader Exploit Using the Tate exploit files on a Soho device will end with an unrecoverable brick. And it currently has no exploit for loading a custom recovery. Be sure you have a 2012 “Tate” device and not the 2013 Kindle Fire HD 7″ “Soho” device.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |